CISCO PA-MC-T3-EC Start Price USD 6,700.00 Current Price USD 6,700.00 Time Left 9 days 9 hours 2 minutes Bid Count 0 Buy It Now Price - Reserve Price - Start Time Wednesday, September 17, 2008 End Time Thursday, January 15, 2009 Location Garden Grove, California See more about 'CISCO PA-MC-T3-EC' Description CISCO PA-MC-T3-EC The new enhanced-capability port adapters are targeted to replace the following Cisco® port adapters: 1-port T3 Serial Port Adapter Enhanced (part number PA-T3+), 2-port T3 Serial Port Adapter Enhanced (part number PA-2T3+), 1-port Enhanced Multichannel T3 Port Adapter (part number PA-MC-T3+), 2-port Enhanced Multichannel T3 Port Adapter (part number PA-MC-2T3+), 1-port E3 Port Adapter (part number PA-E3), and 2-port E3 Port Adapter (part number PA-2E3). These new products will ship in two phases. Phase 1 is targeted for November 2006 and will ship the Cisco 1-Port Multichannel Enhanced Capability Port Adapter (part number PA-MC-T3-EC) and Cisco 2-Port Multichannel Enhanced Capability Port Adapter (part number (PA-MC-2T3-EC). These two port adapters support clear-channel and multichannel functions. The Cisco 7200 Series Network Processing Engines NPE-G1 and NPE-G2 will be the only processors supported in phase 1. One reason for the development of the new port adapters was to overcome performance limitations of the existing multichannel port adapter (PA-MC-2T3+) when sending small packets on both ports simultaneously. The new port adapters do not have the same limitation, and they can achieve line rate with 64-byte packets on both ports. Phase 2 is targeted for March 2007 and will ship the 1-port clear-channel T3/E3 (PA-T3/E3-EC) and the 2-port clear-channel T3/E3 (PA-2T3/E3-EC). These new port adapters will support clear-channel T3 and E3 functions. Phase 2 will also incorporate support for all versions of the new port adapters on the Cisco uBR7200 Series NPE-400, NPE-G1, and NPE-G2 Network Processing Engines and the Cisco 7301 Router. The multichannel enhanced-capability port adapters (PA-MC-T3-EC and PA-MC-2T3-EC) have the latest version of T3 silicon devices that support offloading certain features to the port adapter to relieve the burden on the CPU of the network processing engine. The features offloaded to the port adapter include: Multilink Point-to-Point Protocol (MLPPP), link fragmentation and interleaving (LFI), Multilink Frame Relay (MLFR), and Frame Relay Fragmentation (FRF.12). Channelizing a T3 down to T1s and using MLPPP is a very popular solution for certain customers. This paper discusses why a customer would choose to use MLPPP and how the new port adapters with their MLPPP offload capability would benefit a customer. This document discusses MLPPP and LFI extensively; MLFR and FRF.12 are not discussed because these technologies are roughly the same concepts over different Layer 2 encapsulation (Frame Relay instead of Point-to-Point Protocol [PPP]). ResultsCondition :!!!Fully tested and excellent working condition                  Warranty: 30 days   SHIPPING INFORMATION Payment  COD, paypal, Credit Card, prepaid. Fedex Ground  unless otherwise requested and paid for by the bidder, Overnight Avail. Shipping and handling: $35.00 Auction Terms and Agreement  (Please Read CAREFULLY) Please email with any questions before bidding.Buyer is responsible for all software licensing issues.  Unless otherwise stated in the auction. Place a Bid!